Sunday, October 11, 2009

Kitchen Hygiene



Kitchen Hygiene

Neglect in the care and cleaning of any part of the premises and equipment could lead to a risk of food infection. Kitchen hygiene in very great important to

Those who work in the kitchen, because clean working conditions are more agreeable to work in than dirty conditions;

The owners, because custom should increase when the public know the kitchen in clean;

The customer -no one should want to eat food prepared in dirty kitchen.

Cleaning materials and equipment

To maintain a hygienic working environment a wide rang of materials and equipment is needed. These are same of the items which need to budgeted for ordered, stored and issued.

Brooms

Brushes

buckets

cloths

dusters

Dustbins

mops

spoons

squeegee

scrubbing machine

wet suction cleaner

wet suction cleaner

Dry suction cleaner

ammonia

disinfectant eg:-

Dustbin powder

Floor cleaner

Oven Cleaner

Plastic sacks

Scouring powder

Soap

Steel wool

Washing Powder


Kitchen Premises

Ventilation

Adequate ventilation must be provided so that fumes from stoves are taken out of the kitchen. This is usually affected by erecting hoods oven stoves and using extractor fans.

Hoods and fans must be kept clean; grease and dist are drawn up by the fan and, if they accumulate, can drop onto food.

Windows used for ventilation should be screened to prevent the entry of dust insects, and binds. Good ventilation facilitates the evaporation of sweat from the body; which keeps one cool. No higher than 20 – 26 is desirable for maximum working efficiency and comfort with 16 to 18 C in preparation areas.

Lightly

Good lightly is necessary of that people working in the kitchen do net strain their eyes. Natural lightly is preferable do artificial lightly. Good lightly is also necessary to enable staff to be into corners so the kitchen can be properly cleaned.

Plumbing

Adequate supplies of hot and cold water must be available for keeping the kitchen clean, for cleaning equipment and for staff use. There must be hand washing and drying facilities and suitable provision of toilets, which must net be indirect contact with any rooms in which food is prepared or stored. Hand washing also be available in the kitchen with a suitable means of drying the hands (hat air or towels)

Cleaning of toilets and sinks

Toilets must never be cleaned by food handles sinks and basin should be cleaned and thoroughly rinsed.

Work Surfaced

Floors

Through cleaning is essential: - Floors and are swept, washed with hat detergent water and a chemical and then dried. This can be done by machine or by hand, and should be carried out at least once as day. As a safety precaution, suitable warning signs should be used to attentive staff if the floor is wet.

Walls

The joint between the wall and floor should be rounded for ease of cleaning. Clean with hot detergent water and dry. This will probably be done monthly, but frequency will depend on circumstances.

Ceilings

Ceilings must be free form cracks and flaking. They should not be able to harbour dirt.

Doors & Windows

Door and windows should fit correctly and be clean. The glass should be clean inside and out so as to admit maximum light.

Food lifts

Lifts should be kept very clean and no particles of food should be allowed to accumulate as lift shafts are ideal for rats, mice and insects to gain access into kitchen.

Work Surfaces

Any work surface that comes in contact with food must be kept very clean. Work surface should be cleaned with hat water and detergent after each use and disinfected with either hat water or a chemical. Any traces of a chemical disinfectant must be removed with a final rinse. Disposable, paper towels are than used for drying surfaces.

Stoves

Solid tops should be washed clean or wiped clean with a cleaning pad. When cool, the stove can be more thoroughly cleaned by washing and using is abrasive such as emery-paper. After any kind of cleaning a slid top should always be lightly greased.

On the open type of stove, all the bans and racks should be removes, immersed in hot water with a detergent. Scrubbed clean dried and put Back in place on the stove.

All enamel parts of the stove should be cleaned while warm with hat detergent water ringed and dried.

Steamers

These should be periodically checked by a qualified engineer of ensure that they are working correctly. Steamer trays and the inside of the Steamer should be cleaned with detergent water and rinsed.

Boiling pans

After use, the pan and lid should be thoroughly washed with a mild detergent solution and then rinsed well.

Deep Fryers

Deep fat fryers should be cleaned daily after use by:-

Turning off the heat and allowing the fat to cool.

Draining off and straining the fat.

Filling the fryer with hat water containing detergent and bailing for 10-15 minutes.

Draining of the detergent water, refilling with clean water plus vinegar and water and resoling for 10-15 minutes.

Draining off the water, drying the fryer and refill with clean fat.

Hot cup Boasts

These tops are usually made of stainless steel and should be cleaned thoroughly after each service.

Bain-Marie

After use, the heat must be turned off, the water drained away and the bain-marie cleaned thoroughly inside and outside with hot detergent water, rinsed and dried.

Grills & Salamanders

Bars and trays should be cleaned regularly with hat water containing grease solvent such as soda. After rinsing thoroughly, they should be replaced and the salamander heat for a minutes to dry the bars.

Contact Grills

These are sometimes referred to as a double sided or infra-grills, having two heated surfaces facing each other.

There grills are electrically heated and are capable of cooking certain foods very quickly. The electricity should be turned off after use. When the grill is cool, the cooking surface should be then wiped clean with a damp cloth and lightly oiled to prevent rusting.

Sinks

Sinks, drainers, waste and overflow out lets should be cleaned with a suitable abrasive power cleaner, thoroughly rinsed with plenty of clean water and left to dry.

Tables

Wooden tables should be scrubbed clean with hot soda water rinsed and wiped dry as soon as possible to prevent warping.

Formica or stainless steal topped table should be washed with hat detergent water, rinsed with hot and dried.

Marble slabs should be scrubbed with hot water and rinsed. All excess moisture should be removed with a dry cloth.

Hot pans must not be placed upon tables; triangles must be used to protect the table tops.

The legs and racks or shelves of tables are cleaned with hot detergent water and then dried.

Butcher’s Block

A scraper should be used to keep the block clean. After scraping the block should be used to keep the block clean. After scraping the block should be sprinkled with a few handfuls of common salt in order to absorb any moister. Don’t use water or liquids for cleaning unless absolutely necessary as water will be absorbed into the wood and may cause swelling.

Storage Racks

All types of racks should be emptied and scrubbed or washed periodically.

Food Mixer

All components as well as the main machine should be thoroughly washed and dried. Care should be taken to see that no rust occur on any part. The mincer attachment knife and plates will rust if not given sufficient care.

Chopper

The manual type should be washed and dried after use. Care should be taken with the interior blades; they should be cleaned with a folded cloth.

Masher

The hand type should be washed immediately after use then rinsed and dried.

The electric masher should have the removable sections and the main machine washed and dried after use, extra care being taken over those parts which come into contact with food.

Refrigerators, cold rooms, chill room

Deep-freeze cabinets are used where a walk in deep-freeze section is not required and they maintain a temperature of – 180C.

Always ensure refrigerators maintain correct temperature for food stored.

Never keep uncooked meat; poultry or fish in the same refrigerator, or any other food which not airtight container.

Never refreeze foods that have been thawed out from frozen.

Always rotate stock in refrigerator space.

Clean equipment regularly and thoroughly, in side and out.

Never put hot or warm food in a refrigerator.

Cleaning

Clean thoroughly inside and out at least every two mints.

Switch off power.

If possible transfer stock to available alternative storage.

Clean interior surfaces with lukewarm water and a mild detergent dry all surfaces in side and out.

Switch on power, check when the correct working temperature is reached, refill with stock.

Wooden Chopping Bounds

Before using a new board, wash to remove wood dust. After use scrub with hot detergent water, rinse with clean water, dry as much as possible.

Cutting boards

Polyethylene: - Six bounds can be abstained mashed in different color. These can be kept in a rack after washing and when not in use. This system is designed to cut down on cross –contamination.

To avoid cross contamination, it is important that the some equipment is not used for handing raw and high risk products without being disinfected.

Different colourd shapes are used to identify products or raw materials used:-

Red for raw meat Green for vegetable

Blue for raw fish White for general purpose

Brawn for cooked meats Yellow for sand winches.

Rolling pins, wooden spoons and spatulas

These items should be scrubbed in hot detergent water, rinsed in clean water and dried.

Rolling pins should not be scraped with a knife as this can cause the wood to splinter. Adhering paste can be removed with a cloth. Wooden spoons and spatulas are considered unhygienic unless washed in a suitable sterilizing solution such as sodium hypochloride solution (bleach).

China and earthenware

They should be cleaned in a dish washer with mild detergent or by hand using the appropriate detergent for hand washing.

Materials

All materials should be washed immediately after use in hot detergent water rinsed in hot clean water and then dried. Tammy cloths, muslins and linen piping bags must be bailed periodically in detergent water. Kitchen cloths should be washed or changed frequently, otherwise accumulating dirt and food stains may cause cross-contamination of harmful bacteria/germs on to clean food.

NORMAL CLEANING OF MATERIALS

Metals: as a rule all metal equipment should be cleaned immediately after use.

Portable items: remove Food particles and grease. Wash in hot detergent water. Rinse in water at 77°C 171°F), and dry.

Fixed items: remove all food and grease with a stiff brush or soak with a wet cloth, using hot detergent water. Thoroughly clean with hot detergent water. Rinse with clean water. Dry with a clean cloth.

Marble: scrub with a bristle brush and hot water and then thy.

Wood: scrub with a bristle brush and hot detergent water, rinse and dry.

Plastic: wash in reasonably hot water.

China, earthenware: do not clean with an abrasive. Wash in hot water and rinse in very hot water.

Copper: remove as much food as possible. Soak in hot detergent water with the aid of a brush. Clean the outside with a paste made of sand, vinegar and flour. Wash well. Rinse and dry.

Aluminum: do not wash in water containing soda as the protective film which prevents corrosion may be damaged. To clean, remove food particles. Soak. Wash in hot detergent water. Clean with steel wool or abrasive. Rinse and dry.

Stainless steel: stainless steel is easy to clean. Soak in hot detergent water. Clean with a brush. Rinse and dry.

Tin: soak, washed in detergent water, rinsed and dried.

Zinc: This is used to coat storage bins of galvanized iron and it should not be cleaned with a hard abrasive.

CLEANING OF LARGE ELECTRICAL EQUIPMENT (MINCERS. MIXERS,

CHOPPERS, SLICERS)

Switch off the machine and remove the electric plug.

Remove particles of food with a cloth, palette knife, needle to brush as appropriate.

Thoroughly clean with hand-hot detergent water and rinse thoroughly.

Dry and reassemble.

While cleaning see that exposed blades are not left uncovered or unguarded and that the guards are replaced when cleaning is complete.

Any specific make’s instructions should be observed

Windowpanes and glasses:

Wipe the glass with a dry duster to remove the loose dust. Spray undiluted Glass cleaner on the surface. Wipe with a newspaper until all stains and spots are removed. Polish the glass surface with newspaper.

Salvers

Soak the salvers in a soap solution over night.

Wipe clean with a sponge.

Rinse under running water till all the soap is washed off.

Sanitize

Run in oven to dry.

Ceiling

Clean with a solution of Liquid soap and wipe off with a sponge.

Wipe dry using a dry check duster.

If the stains persist, repeat the process. The ceilings have to be cleaned minimum once a week.

Picture Frames

Wipe clean using a dry check duster. For stains use a damp duster.

For cleaning the glass, spray glass cleaner and wipe clean with a newspaper.

No comments:

Post a Comment